NG # 02304-HW-DYWER-003
MF # 475-0-FM
SKU # 475-0-FM
The Series 475 Handheld Digital Manometer measures positive, negative, or differential pressures of air and natural gases in ranges from 1 in w.c. (0.249 kPa) to 150 psid (10.34 bar). The dual push pads on the front panel control the on/off, auto zero, and pressure unit selection, allowing for simple operation with no set up needed. When used with a Dwyer® Pitot tube, the Series 475 can also be used as an air velocity gage.
Stock
10
in stock
Custom Pricing
Get A Quote
Stock
10
in stock
Custom Pricing
Get A QuoteThe Dwyer 475 Mark III Handheld Digital Manometer is ideal for field calibration, monitoring or trouble shooting HVAC systems, clean rooms or a wide range of other low pressure pneumatic systems. This handy instrument measures positive, negative or differential pressures of air and natural gases in ranges from 1" w.c. (0.249 kPa) to 150 psid (10.34 bar). Its simple operation and easy to read digital display make it an indispensable test instrument for the plant engineer, industrial hygienist and HVAC technician. When used with a Dwyer Pitot tube, the Series 475 Mark III can also be used as an air velocity gauge. The Dwyer 475 is approved and is intrinsically safe for hazardous locations, Class 1, Div.1, Group A, B,C, D, T4.
The Dwyer 475 Mark III is housed in a durable extruded aluminum case with its solid state circuitry mounted on a tough fiberglass epoxy circuit board. To meet the most demanding applications and to provide stability of instrument reading, the 1" w.c. range is compensated for position sensitivity through use of a unique dual sensor system. A standard 9 volt battery provides up to 100 hours of operation. Dual push pads on the front panel control on-off, auto zero, and pressure unit selection. No setup or leveling. The large 0.42" LCD display is easy to read, minimizing data collection errors. Units include a "low battery" indicator. The pressure sensor used is a highly stable silicon piezoresistive device. Standard connections are dual sized for 1/8" or 3/16" I.D. vinyl or rubber tubing. Complete instructions are conveniently printed on rear of housing.
Dwyer 641 Air Velocity Transmitter
Dwyer 641RM Air Velocity Transmitter
Dwyer 2000 Series Magnehelic Pressure Gauges
Dwyer 605 Series Magnehelic Indicating Pressure Transmitters
KUKA Articulated robot KR IONTEC
Keystone Pipe Handling Tools Beckets & Bails
Keystone Dual Flapper Check Valves
Type CD Drill Pipe Elevators API Spec 8A/8C For Drill Collar/Casing/Tubing
Coriolis flow transmitter CFT34A
Blancett 900 Series Positive Displacement Flow Meter
GF Signet 515 Rotor-X Paddle Wheel Flow Sensor
GF Signet 2536 Rotor-X Paddle Wheel Flow Sensor
