NG # 02063-HW-PEPPERL-008
MF # UBE800-F77-SE2-V31
This sensor is an ultrasonic through-beam barrier consisting of a transmitter and a receiver. The receiver is equipped with a switching output.
Stock
5
in stock
Custom Pricing
Get A Quote
Stock
5
in stock
Custom Pricing
Get A Quotehrough-beam ultrasonic barrier, Miniature design, Highly visible LEDs for Power ON and switching state, High switching frequency, Sensing range: 0 ... 800 mm emitter/receiver spacing, Series: -F77, Operating voltage: 20 ... 30 V DC , ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 80 %
Output type: 1 switch output PNP, NO, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V
| Sensing range | 0 ... 800 mm emitter/receiver spacing | |
| Standard target plate | see table | |
| Transducer frequency | approx. 300 kHz | |
| Response delay | ≤ 5 ms | |
| Permissible cable length | max. 300 m | |
| LED green | Power on ( emitter ) | |
| LED yellow | switching state ( receiver ) | |
| Rated operating voltage | 24 V DC | |
| Operating voltage | 20 ... 30 V DC , ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 80 % | |
| No-load supply current | ≤ 20 mA | |
| Time delay before availability | ≤ 150 ms | |
| Input type | 1 program input (receiver) | |
| Level | low level : 0 ... 0.7 V ; high level : > 14 V | |
| Input impedance | 16 kΩ | |
| Pulse length | ≥ 3 s | |
| Output type | 1 switch output PNP, NO | |
| Rated operating current | 200 mA , short-circuit/overload protected | |
| Voltage drop | ≤ 2 V | |
| Switching frequency | 100 Hz | |
| Off-state current | ≤ 0.01 mA | |
| Standard conformity | ||
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
|
| UL approval | cULus Listed, Class 2 Power Source | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Shock resistance | 30 g , 11 ms period | |
| Vibration resistance | 10 ... 55 Hz , Amplitude ± 1 mm | |
| Connection type | M8 x 1 connector , 4-pin | |
| Degree of protection | IP67 | |
| Material | ||
| Housing | Polycarbonate | |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | |
| Installation position | any position | |
| Mass | per 10 g | |
| Tightening torque, fastening screws | max. 0.2 Nm | |
| Dimensions | ||
| Height | 31 mm | |
| Width | 12 mm | |
| Length | 23 mm | |
Pepperl+Fuchs Inductive proximity sensor NMB series
Pepperl + Fuchs Diffuse Photoelectric Sensor, Block Sensor, 0 → 2.5 m Detection Range
Pepperl + Fuchs CJ1W Series PLC I/O Module
Pepperl + Fuchs Inductive Block Proximity Sensor, 30 mm Detection, PNP NO, 10 → 30 V dc
KUKA Articulated robot KR IONTEC
Keystone Pipe Handling Tools Beckets & Bails
Type CD Drill Pipe Elevators API Spec 8A/8C For Drill Collar/Casing/Tubing
When you visit any website, it may store or retrieve information on your browser, mostly in the form of cookies. This information might be about you, your preferences or your device and is mostly used to make the site work as you expect it to. The information does not usually directly identify you, but it can give you a more personalized web experience. Because we respect your right to privacy, you can choose not to allow some types of cookies. Click on the different category headings to find out more and change our default settings. However, blocking some types of cookies may impact your experience of the site and the services we are able to offer. You can get more information by going to our Privacy Policy or Statement in the footer of the website.
Check all added RFQ in one place, hit the button to show all added RFQ.
Submit RFQ
