The ecom RSM-Ex01-D1, designed for North America NEC/CEC Division 1, is an intrinsically safe remote speaker microphone (RSM) available in both wired (3.5mm straight plug) and Bluetooth options. With an...

The RSM-Ex 01 BT boasts an IP64 rating and features a built-in noise reduction function. Delivering clear, high-volume audio with a capacity of up to 103 dB, this device is...

The 3M™ PELTOR™ WS™ LiteCom Pro III Ex Headset, with ATEX approval, provides wireless communication in high-noise environments. Ideal for applications in the Oil & Gas Industry, Mining, and settings...

The Ex-TRA 30 series offers cutting-edge safety solutions for communication in Zone 2 hazardous areas. With versatile options like headband, light, and neckband variants, it provides flexible solutions tailored to...

The thinnest tablet computer globally designed for Zone 2 / DIV 2 applications, measuring just 13.6 mm / 0.54" inclusive of the protective case.

Attaining an equilibrium between cost management and customer contentment requires authentic supply chain agility. Bringing this vision to fruition calls for a highly adaptable workforce capable of prompt, confident, and...

I/O expansion module for the ACM with ACM-DR- VLX

Alerton® VisualLogic® Expansion Input/Output Modules (VXIO) are designed to expand the I/O capacity of Alerton® VisualLogic® IP Controllers (VIP)

The IQ™4E controller has 10 universal inputs and 6 analogue voltage outputs and is expandable up to 192 points (depending on the controller variant) by adding I/O modules.

Sylk™ I/O modules are part of the Spyder® family of products and expand the footprint of a single Spyder device, increasing the controller's ability in situations that require a large...

ComfortPoint™ Open solution fully programable BACnet-Building Controller (B-BC) for AHU, RTU and Central Plant applications, CPO-Studio compatible

The GW-1000-NWE Gateway is the advanced device that integrates and aggregates data from field devices like Thermostats, Sensors and IO with the Small and Medium Building Administrator Supervisor Dashboard cloud...

The MS4104, MS4109, MS4604, MS4609, MS8104 and MS8109 are spring return direct coupled actuators (DCA) for Fire and Smoke dampers.

Series 90 Modutrol IV™ Motors are spring return and non-spring return modulating proportional control motors. These motors are used with controllers that provide a Series 90 output to operate dampers...

The VH Series High Performance Butterfly Valve features a double offset (or, double eccentric) shaft design to minimize seat abrasion and lower torque. This double offset design allows the disc...

Honeywell  Ball Joint HVAC Damper Control Rod Ventilation Fan Actuator Arm

Parts and accessories are for use with direct coupled actuators These accessories include shaft adapters, resistor kits, and crank arm kits, among others.

Parts and accessories for use with large linear valve actuators in the ML6420, ML6425, ML7420, ML7425, ML6421, and ML7421 series

Parts and accessories for control ball valve actuators, such as valve adapters and terminal blocks.

Brass Compression Adaptor is used to facilitate the connection of impulse piping to differential pressure switch.

The C7262 Sensor is a stand-alone carbon dioxide (CO2) and temperature sensor for use in determining ventilation necessity with HVAC controllers. The C7262 measures the CO2 concentration and temperature in...

KTFxx cable-type bulb temperature sensors are versatile for both immersion and duct air applications. Suitable for hot and cold water installations, these sensors are compatible with Pt1000, NTC 10k, NTC...

Honeywell's Outdoor Temperature Sensor features a singular sensor element designed for detecting external temperatures. Widely employed in heating, ventilation, and air conditioning systems, it enables precise climate control by monitoring...

The T755 temperature sensors offer user-friendly operation and versatile electronic temperature control. These sensors, equipped with a range of features, find common applications in monitoring temperatures such as return air,...

Honeywell's TB wall temperature sensors are NTC Type II with a resistance of 10K ohms. Designed for compatibility with the TB7200, TB7300, and TB7600 Series communicating thermostats, as well as...

TP974 serves as direct-acting, proportioning temperature sensors employed alongside pneumatic controllers. These sensors effectively regulate valve and damper actuators in both one- and two-pipe installations.

Honeywell's TR20 Wireless Wall Modules and Receivers fulfill the need for precise, energy-efficient control without the expenses and time associated with traditional wiring.

Employ the VFF Series Immersion Temperature Sensors for swift and accurate temperature measurements in heating, cooling, or domestic hot water applications, ensuring rapid response in diverse temperature monitoring scenarios.

E-Mon Class 6000 Split-Core current sensors, with a 333mV output, cover a broad amperage range from 25 to 5000 Amps.

Current sensors with a 600V rating specifically crafted for use in Multi-Mon and PowerSmart+ meters.

Cold water pulse meters employ multi-jet principles to achieve precise water measurement, recognized for their simplicity, durability, and accuracy.

The MultiMag™ series hot water meters employ multi-jet principles to ensure precise water measurement, renowned for their simplicity, durability, and accuracy.

flowIQ® 3200 encompasses a range of all-in-one water meters featuring a sealed design. These meters come equipped with a front-facing wired interface connection and built-in radio communication capabilities.

A smart meter equipped with dual protocol capability offers communication options via RS485 and Ethernet, accompanied by two pulse outputs for enhanced versatility

Green Class Submeter with Dual Protocols and CO2 Footprint Monitoring

A single-phase kWh meter is employed to track the electricity consumption of individual loads downstream from the utility meter.

Compact Enclosure Cabinets for E-Mon Class 1000, 2000, or 3200 Meters with Multiple Meter Units.

A three-phase kWh/kW (demand) meter is employed for monitoring the electricity consumption of specific loads following the utility meter.

Submeter for Eco-Friendly Classrooms: Measures CO2 Levels and Carbon Footprint Data.

The Honeywell Class 200 kWh/Demand meter is a three-element device designed for monitoring the electricity consumption of specific loads beyond the utility meter, providing detailed insights into individual power usage.

Smart meters equipped with a single RS485 protocol capability, supporting EZ 7, Modbus RTU, or BACnet MS/TP.

The Class 320 Advanced KWH/Demand Meters represent fully electronic devices equipped with widely-used communication protocols. With 38 points of information, they efficiently monitor electrical usage in commercial and industrial settings.

A versatile smart meter featuring dual-protocol capability, offering both RS485 and Ethernet communication options, along with two pulse outputs and two external meter inputs.

The E-Mon Class 6200 Pulse Meter offers versatility and field configurability in a compact design, providing a reliable submeter solution for a range of pulse applications.

A sophisticated energy monitoring system with multiple branches that captures detailed energy intelligence data. Designed for tenant billing, cost allocation, and effective energy management.

Integrated Power Meter with Power Quality Analysis Capabilities

A versatile power meter capable of measuring over 100 energy parameters, designed for revenue metering, power quality assessment, and harmonic analysis.

Sophisticated power quality analyzer designed for revenue-grade accuracy, presented in a socket meter configuration.

The Interval Data Recorder (IDR) functions as an energy data collection device, featuring an advanced 4-line display that presents real-time load information and KWh usage.

METER10 furnishes data on kilowatts (kW) and kilowatt-hours (kWh) specifically for single-phase power.

The Ball Valve with a sensor port functions as a shut-off valve in hydronic heating, cooling, or potable water systems. Available in sizes ranging from DN15 to DN40, it features...

Utilize brass immersion pockets for temperature sensors across various sizes. For sizes DN65 and larger, immersion pockets are essential, while also recommended for smaller sizes.

The S0-Modbus coupler module serves as a device to gather S0 pulses, transforming the consumption data from any S0-output-equipped measurement device into a bus-accessible format. This enables seamless accessibility by...

The electrical energy meter enables straightforward reading of essential data, including total and partial energy consumption, current, voltage, as well as active and reactive power.

A direct-reading electrical energy meter displays comprehensive data, including total and partial energy consumption, individual phase currents and voltages, as well as active and reactive power for each phase and...

An electrical energy meter designed for converter connections up to 1500 A, offering direct readings of crucial data. This includes total and partial energy consumption, current and voltage measurements for...

SBC energy meters are perfectly designed to efficiently accommodate numerous measuring instruments within a minimal footprint. Their compact size allows seamless integration into existing switch cabinets without the need for...

Pneumatic remote bulb temperature controllers offer proportional control for pneumatic valves and damper actuators within HVAC systems.

A proportional, high-capacity pneumatic controller, designed for single or dual input configurations, operates in tandem with remote sensors to deliver proportional (P) control.

Enhance HVAC system control with MP953 Pneumatic Valve Actuators, offering proportional regulation for steam or liquids at varying temperatures. These actuators efficiently operate V5011, V5013, and VGF valve assemblies.

The MP953 Pneumatic Valve actuators deliver proportional control for regulating steam, hot, or cold liquids within HVAC systems, effectively operating V5011, V5013, and VGF valve assemblies.

The MP958 Pneumatic Valve Actuator operates directly and is exclusively compatible with Honeywell V5852A2xx, V5862A2xx, V5853A2xx, and V5863A2xx Terminal Unit Valves for precision control of hot and/or chilled water.

Honeywell offers pneumatic actuators designed for controlling air dampers.

Pneumatic control systems utilize pressure reducing valves to regulate the air pressure supplied to them.

The VP512A unit ventilator valves are designed as normally-open, single-seated, straight-through, or angled globe valves. They offer proportional control for either steam or hot water within unit ventilators.

The E/P Transducer receives a proportional voltage signal from an electronic controller, transforming it into a proportional pneumatic signal within the range of 0.2 to 1.0 bar. This pneumatic output...

CLEPAS pneumatic airflow differential pressure switches detect variations in air pressure within HVAC systems, offering on-off output as a response.

Electric pneumatic relays are offered in wall-mount or panel-mount configurations, supporting a voltage range from 24 to 50/60V AC.

P643A1007 Pressuretrol™ pneumatic switches transform pneumatic signals from controllers into electrical switches, facilitating start and stop control.

P658 switches seamlessly transform pneumatic signals from a controller into electrical switches, facilitating precise start and stop control.

RP418 and RP818 electric/pneumatic relays function as solenoid valves, regulating the air supply to pneumatic controls. The RP418A-C responds to an on-off line voltage signal, while the RP818A and B...

Designed for scenarios where the functionality of a pneumatic device relies on an electrical circuit, RP419 three-way valves are ideal for such applications, ensuring seamless integration of pneumatic operations with...

In pneumatic control applications, RP913 diaphragm logic pressure selectors are employed to choose the highest and/or lowest pressure input from zone thermostats.

RP970A pneumatic capacity relays operate directly and proportionally, featuring a 1:1 pressure ratio.

RP971A ratio relays, with four ports and non-bleed design, generate modulating pressure outputs in proportion to pilot input variations. Ideal for sequential control of pneumatic valves or damper actuators from...

Designed for heating and air conditioning control systems, RP972A pneumatic reversing relays serve as modulating relays. These relays efficiently reverse the flow and enhance the branchline pressure capacity to the...

Honeywell's Pneumatic Averaging Relays serve as three-port relays within HVAC systems. They effectively average signals from two thermostats to regulate a singular device, such as a heating coil valve, enhancing...

The RP975 Pneumatic Hesitation Relay from Honeywell Building Management Systems offers controlled ventilation and ensures the minimum outside air damper position for large-volume unit ventilators.

UEC24014M262 Differential Pressure Switches activate or deactivate a switch based on variations in pressure across a pump or filter.

The CP980 Velocitrol velocity sensor and controllers integrate highly sensitive air velocity sensors with pneumatic controllers to detect and regulate airflow in air terminal units. This system operates independently of...

The TP9600 Series pneumatic thermostats offer proportional control specifically designed for pneumatic actuators within HVAC systems.

These pressure and receiver gauges are specifically crafted for compatibility with RP920 pneumatic controllers. They are offered with scales in °C, °F, psi, WC, and RH, ensuring versatility in measurement...

Smart IO and Gateway for Remote Antenna Connectivity

Tailored for industrial use, the Entry-Level Managed Ethernet Switch with 5 ports offers a specialized design. These switches feature valuable management functions, including Turbo Ring and Turbo Chain, enhancing their...

The EIS8-100T presents eight ports of Ethernet Switch designed for twisted-pair cabling. Compliant with UL 864 standards, these Ethernet Interconnect Switch models serve as Component Control Units and Accessories for...

The ADP-N3E Adapter Module, a microprocessor-controlled unit, is designed for mounting on the installation rail within System 8000 or IQ8Control fire alarm panels.

The RS232/RS485 Converter is designed to transform serial interfaces between RS 232 and RS 485 bidirectionally. Ideal for rail mounting installations, this device ensures seamless compatibility and communication between different...

The Industrial DIN Rail Ethernet-Optical Fiber Media Converter features a 12-48Vdc power supply, designed to withstand challenging environments

Fiber Optic Cable Interface for Networking Esser FACP (essernet) Conversion.

The HLR1001 IP over Coaxial Converters extend power supply reach via coaxial cables, facilitating prolonged transmissions by converting from RJ45 to BNC ports.

The IMC-21 Series Media Converters serve as entry-level solutions, converting 10/100BaseT(X) to 100BaseFX, tailored for robust and dependable performance in challenging industrial settings.

This interface features an RS 232 connection at the input and dual RS 485 connections in parallel at the output, allowing flexibility with either 3-wire or 5-wire configurations.

The LAN485KIT converter kits are designed for compatibility with N-1000 Series controllers, featuring both RS-485 and LAN interfaces included in the package.

LANSRLU1 converters empower the administration of serial devices via IP-based Ethernet networks, offering an alternative to restricted point-to-point serial connections with limited distance. These devices seamlessly transform RS-232 signals into...

The Media Converters feature a versatile interface circuit capable of managing RS-232 or RS-422/485 serial interfaces and supporting both multimode and single-mode fiber connectivity.

PT590 Mission Critical TETRA Portable Radio inherited all the functionalities from Hytera’s first-generation TETRA radio and added lots of new features.

MT680 Plus Mission Critical TETRA Mobile Radio, enabled by the 10 Watt RF power and the 4 Watt speaker, is widely used by first responders and public safety professionals who...

Empowered by patented designs, PT310 TETRA Portable Radio delivers loud and clear audio in harsh environments like ports and open pit mining sites. 

Empowered by patented designs, PT350 TETRA Portable Radio delivers loud and clear audio in harsh environments like ports and open pit mining sites.

The HP78X is our brand new Professional DMR Portable Two-way Radio, and represents the future on style and functions that refreshes the standards in digital radios

The HP70X is our brand new Professional DMR Portable Two-way Radio, and represents the future on style and functions that refreshes the standards in digital radios.

Small and light in style, the HP68X delivers uncompromising clear audio and extended coverage together with powerful battery, exceptional ruggedness and abundant features.

Small and light in style, the HP60X delivers uncompromising clear audio and extended coverage together with powerful battery, exceptional ruggedness and abundant features.

HM78X is the next generation of Professional DMR Mobile Two-way Radio, flexible and scalable.

It is the new generation entry-level professional DMR mobile two-way radio designed to provide reliable voice and data communication in the vehicle anytime.

The 87V MAX contains all the trusted features of the most popular digital multimeter used today, the Fluke 87V, and then some. From wet, dusty or dark environments to long...

The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations....

Thermal imaging multimeters are a first-line troubleshooting tool for electrical equipment that can check hot spots on high-voltage equipment and transformers, and detect heating of fuses, wires, insulators, connectors, splices...

The Fluke 179 True-rms Digital Multimeter is the industry-standard troubleshooting tool for electrical and electronic systems. This incredibly versatile multimeter makes a perfect front-line troubleshooting tool with an input protection...

The Fluke 117 Electricians Multimeter is a compact, CAT III 600 V, True-rms meter that includes an easy-to-use interface with a bright backlight for darker worksites.

The Fluke 177 True-RMS digital multimeter measures twice as fast as other multimeters; digital display with analog bar graph and backlight.

With its precision, reliability, and ease of use, the Fluke 177 Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600...

This Fluke Connect-compatible DMM is designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment.

The Fluke 28 II digital multimeter defines the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems.

The 116 Digital Multimeter is tailored for professionals in the heating, ventilation, and air conditioning (HVAC) industry, offering specialized features to meet the unique needs of HVAC professionals

Effortlessly navigate through scan data, 3D models, and field layout points using a tablet controller while actively engaged in on-site tasks.

Empower field teams with Trimble Connect's collaborative features seamlessly integrated with the mixed reality capabilities of HoloLens 2 for an enhanced open collaboration experience.

The Trimble X9 3D Laser Scanner incorporates advanced features such as automatic calibration, self-leveling, and a laser pointer, alongside improved range, accuracy, and speed. These innovations empower more efficient and...

An economical display designed for schools and restaurants, capable of notifying users about conditions that might elevate the risk of indoor airborne viral transmission.

Honeywell BW™ Icon stands as a fixed-life, 2-year, 4-gas detector designed to address common workplace gas hazards. With a unique feature of a fixed two-year lifespan, it eliminates the need...

The Honeywell BW™ Icon+ offers an intuitive icon-based interface within a practical design. Enhance the longevity of your 4-gas detectors, optimize overall ownership costs, and choose from a range of...

Honeywell BW™ Flex offers versatility for safeguarding individuals in diverse sectors, spanning steel, wastewater, paper, and pulp industries. With a selection of over 15 sensors, it enables the simultaneous detection...

The Honeywell BW™ Ultra stands as a dedicated five-gas detector crafted by Honeywell for the precise sampling and monitoring of confined spaces, both pre- and post-entry. Leveraging cutting-edge sensor technology,...

Multi-channel command and control center for MeshGuard network

The Honeywell BW™ Solo, a single-gas detector with Bluetooth Low Energy (BLE) connectivity, offers effortless maintenance. It delivers real-time insights into the safety status of workers in hazardous areas, empowering...

Quick, precise, and easy to use, this vane anemometer provides flow measurement and volume flow calculations in ventilation ducts and offers more flexibility with the cable-connected telescopic probe. In addition,...

Carry out pressure difference measurements at A/C system filters or air flow measurements in ventilation ducts using a pitot static tube. 

The Testo 760-3 has an AC/DC voltage measuring range of 1000 V, TRMS, duty cycle, low pass filter, and temperature measuring. Testo's exclusive auto-test setup enables the user to simply...

Testo's exclusive auto-test setup enables the user to simply turn on the unit, connect the leads, and begin measuring. The Testo 760 Digital Multimeter detects the lead connection and prevents...

 The Testo 760 Digital Multimeter detects the lead connection and prevents switching from V to A or A to V if leads are not in proper socket.

The Testo 512-2 digital manometer / anemometer kit allows you to perform system diagnostic tests with a single meter including total external static pressure (TESP), differential pressure, manifold pressures, duct...

Internal NTC thermistor for temperature and external capacitive humidity sensor for the continuous monitoring of ambient conditions in high humidity areas. Stores up to 1 million temperature and humidity readings.

Ideal for monitoring temperature and humidity-sensitive goods in storage, this mini logger monitors building climate continuously, securely, and unobtrusively. In addition, this data logger features high data security, can store...

The proven heated diode sensor provides great sensitivity down to 0.15 ounces/year including the new refrigerant blends like R-410A, R-407C, and R134-a, allowing you to find the most refrigerant leaks.

Measures non-contact temperature with an optic target ratio of 10:1. Photograph objects with smart device, capturing measurement marker and temperature values for reference and reporting. The smart app allows you...

Ideal for the continuous monitoring of storage temperatures. Features a large display, alarm indication and data memory capable of storing 16,000 temperature readings.

Measures air velocity, volume flow and temperature. Also measures in-duct air flow and automatically calculates volume flow when you enter in duct dimensions. Measurement data is transmitted via Bluetooth to...

Features a foldable to 90°, small diameter probe that is ideal for in-duct measurements, along with a Bluetooth range of up to 350'. Quickly and accurately measure relative humidity and...

Quickly identifies temperature changes by monitoring real-time trending and data logging, this tough, accurate, and easy-to-use thermometer also features a Bluetooth range of up to 350'. Accurately measures the temperature...